PEM Logo PEMSERTER Logo Atlas Logo 3V Logo QRP Logo SI Logo StickScrew Logo French Flag German Flag Chinese Flag Spanish Flag
 

Products & Services

 
Introduction | PEMSERTER Presses | In-Die Feeding System | Accessories | Leasing Options | Operation, Tooling & Maintenance | Rebuild Program | Used Equipment

PEMSERTER® Series 2000® Software Information

Series 2000 Automatic Insertion Press
Ver 6.01 Operating Software

Designed for the Series 2000 (2008 and 2018), yet can retrofit to models 2007 / 2017, the software enhances the operation of the Series 2000 press, speeds productivity, and improves quality control. These features allow greater productivity and reduced operating costs.

Smart Dwell/Force Verification
A method to ensure a consistent, reliable, and secure installation by monitoring the installation force and dwell time at each installation. Installation parameters are verified to meet minimum standards established at set-up. The operator is alerted if standards are not meet.

Soft Touch
Workpiece protection system achieved by gentle work piece contact at fastener installation that also reduces press installation noise. Use with soft or painted/coated work pieces to protect the finish.

QX™ Turret Tool System
The PEMSERTER® QX™ Turret Tool System for use on the current model PEMSERTER Series 2000 automatic feed press provides a quick and efficient method to quickly change between anvil tools while handling the work piece to install different fasteners.

Series 2000® With Dual Bowl and QX™ Turret Tool System
The dual bowl expansion cart option and the QX™ Turret Tool system provides a quick and efficient method to quickly change between anvil tools while handling the work piece to install different fasteners. With the use of the second bowl on the expansion cart and the QX Turret Tool System, you can install up to four different fasteners; two in automatic feed mode and two in manual feed mode. A third bowl on a second expansion cart can also be added for appropriate applications.

Fastener Length Monitoring (FLM)
A method to check the length of each fastener prior to installation in the
workpiece. Using the optional FLM hardware, the installation of the correct
length of each stud or standoff can be assured reducing quality related callbacks and reworks.

Set-Up Access Codes
A quality system that provides password access to levels of run/set-up/
maintenance functions. By restricting access to certain press actions, chances for workpiece damage and operator injury can be eliminated.

Maintenance Diagnostics
A control system that allows different levels of access to digital and analog
controls to allow diagnostic testing for maintenance and repair of the Series 2000 press. The trained maintenance person can utilize these controls to uncover and solve press operational issues keeping the press online for improved productivity.