Products & Services Presses Quick Nav Series 3000 Press Series 2000XT Press Series 2000 Press Series 4 Press Series LT4 Press Series P3 Press Series Micro-Mate Series P3 Press Bulletin Intro | Presses | Used Presses | Rebuild Program | In-Die | Leasing | Accessories | Technical

 

The PEMSERTER® SERIES P3® fastener installation press is a portable hand tool weighing only 4.6 kg. / 10 lbs. that can develop a squeezing force of 26.4 kN / 6000 lbs. With the PEMSERTER Series P3 press, you can easily install self-clinching nuts and studs in metric or unified sizes. The metric press kit contains punches and anvils to install nuts (S, CLS, and CLA) ranging from M2 thru M5 thread sizes and studs (FH, FHS, and FHA up to 12mm in length) ranging from M2.5 thru M5 thread sizes. The unified press kit contains punches and anvils to install nuts and studs up to 0.5" in length ranging from #2-56 thru #10-32 thread sizes. P3 Components Parts Listing Auxilliary Bill Of Material Identification Drawing

Specifications Ram Force Air Requirements Pressure System Type Length Width Throat Depth Weight Up to 26.7 kN (6,000 lbs.) 6.2 to 6.9 BAR / 90 to 100 PSI .25 liters / 15 cu. in. per cycle Pneumatic 40.6 cm / 16" 15.8 cm / 6.2" 7.6 cm / 3" 4.6 kg / 10 lbs.

Features Pneumatic power for consistency and simple operation. Requires shop air only. Trigger controlled safety. Snap-in tooling changeover. Available with metric or unified tooling. Can be bench-mounted. One year warranty.