|
In-Die
Feeding System
The PEMSERTER® Die Feed System will bring new dimensions to
your stamping capabilities. It incorporates the latest technologies
to deliver the performance that is needed to compete in the highly
competitive stamping industry. It will eliminate the secondary
operations typically required for fastener insertion, thus reduce
your overall labor costs, improve part quality and dramatically
improve the through put of your product.
 Recognizing
the need for flexibility, the system can be configured to feed nuts,
studs, and/or standoffs for multiple or single insertions, generally
matching the rate of your stamping press. As designed the system interfaces
with the die and the press with surprising ease. Through the use of
multi pin twist lock connectors it is virtually plug and play. All that
is needed to operate the system is a standard 110V receptacle and shop
air.
Key
Advantages:
- Fasteners take
up less real estate/area on work piece
-
Fasteners
are flush on one side
-
Fasteners
can be installed in compound angles
-
Fastener
installation can take place in the final stations of the progressive
die
-
True
positional tolerance on fastener
- Excellent perpendicularity
for studs & stand-off(s)
- Fasteners are
always in a captured state
- Fastener installation
into the workpiece is verified at each location
Benefits:
Literature
FAQ's
Characteristics unique to the PEMSERTER®
In-Die System
Click here to request a sample of the cost savings comparison.
Download In-Die Data Insertion Document
|
