|
L6000 Operating Instructions
Pull knob completely out and place fastener onto pull-up stud (Fig. 1). Holding fastener with fingers, push knob until it is all the way into the barrel (Fig. 2). Fastener should now have all the threads engaged onto the pull-up stud. Hold tool at a 90-degree angle to work, and place fastener in hole. Squeeze handle toward barrel until resistance is felt (Fig. 3). The handle will not touch the barrel. DO NOT apply excessive force or threads may be stripped. Release handle and pull knob completely out, this will release pull-up stud from fastener.
  
Figure 1. Figure 2. Figure 3.
Thread Size |
Complete Tool Part Number |
4-40 |
L-6000-440 |
6-32 |
L-6000-632 |
8-32 |
L-6000-832 |
10-24 |
L-6000-1024 |
10-32 |
L-6000-1032 |
1/4-20 |
L-6000-2520 |
1/4-28 |
L-6000-2528 |
M3 |
L-6000-M3 |
M4 |
L-6000-M4 |
M5 |
L-6000-M5 |
M6 |
L-6000-M6 |
|
